Light Tunnel SRT

silver based and light reflective layer used to convey the light inside the building features the highest (98%) reflective coeff

The SRT light tunnel’s main role is the same as the SLT light tunnel’s supplying the interior with the proper amount of natural light. The SRT light tunnel has a rigid light transmitting tube, made of aluminium and covered on its surface with a silver based and light reflective (in 98%) layer. The inside of the tube looks like before mirror. This type of light transmitting tube secures that daylight is conveyed in huge quantities inside the interior. The SRT light tunnel can be used in every kind of buildings, but because of its high effectiveness is recommended to be installed in special building where the daylight is transmitted into long distances e.g. 39' (12 m). The SRT light tunnel can be also used at nights thanks to the light installation kit which performs the function of the lamp.

Features: 

  

light tunnel consists of the following parts: dome, flashing, riged light transmitting tube, elbow, prismatic and transparent diffuser and ceiling frame;

silver based and light reflective layer used to convey the light inside the building features the highest (98%) reflective coefficient;

angle adjustable elbow (element of the installation kit), gives a possibility to adjust the pitch of tube inclination (between 0 and 65 degrees) and helps to avoid construction obstacles during installation;

specially prepared flashings guarantee easy and water tight installation; 

suitable for roofs with pitches between 15 and 60 degrees or for flat roof coverings (available to order);

there are three types of flashings available; for flat, profiled and high profiled roof coverings.

Light Tunnel SRT